HP StorageWorks AB232A, Руководство по установке

Страница: 44 / 62

Diagnostic and Configuration Utilities
44 AB232A PCI-X Host Bus Adapter Installation Guide
Table 9 lists the Arbitrated Loop Physical Addresses (AL-PA) you can set.
Set Up Persistent Binding
The persistent binding feature allows you to control the devices that are to be
presented to the system.
The Miniport driver detects all devices attached to the HBAs. Global
automapping assigns a binding type, target ID, SCSI bus, and SCSI ID to the
device. The binding type, SCSI bus, and SCSI ID may change when the system is
rebooted. When persistent binding is applied to one of these targets, the binding
type, SCSI bus, and SCSI ID remain the same, whether the system is rebooted or
whether Global Automap All Targets is subsequently disabled (enabled by
default).
The binding information is permanent because it is stored in the Windows
registry. The driver refers to the binding information at bootup.
Table 9: AL-PA Values
0x01 0x02 0x04 0x08 0x0F 0x10 0x17 0x18 0x1B
0x1D 0x1E 0x1F 0x23 0x25 0x26 0x27 0x29 0x2A
0x2B 0x2C 0x2D 0x2E 0x31 0x32 0x33 0x34 0x35
0x36 0x39 0x3A 0x3C 0x43 0x45 0x46 0x47 0x49
0x4A 0x4b 0x4C 0x4D 0x4D 0x51 0x52 0x53 0x54
0x55 0x56 0x59 0x5A 0x5C 0x63 0x65 0x66 0x67
0x69 0x6A 0x6B 0x6C 0x6D 0x6E 0x71 0x72 0x73
0x74 0x75 0x75 0x79 0x7A 0x7C 0x80 0x81 0x82
0x84 0x88 0x8F 0x90 0x97 0x98 0x9B 0x9D 0x9E
0x9F 0xA3 0xA5 0xA6 0xA7 0xA9 0xAA 0xAB 0xAC
0xAD 0xAE 0xB1 0xB2 0xB3 0xB4 0xB5 0xB6 0xB9
0xBA 0xBC 0xC3 0xC5 0xC6 0xC7 0xC9 0xCA 0xCB
0xCC 0xCD 0xCE 0xD1 0xD2 0xD3 0xD4 0xD5 0xD5
0xD9 0xDA 0xDC 0xE0 0xE1 0xE2 0xE4 0xE8 0xEF