HP StorageWorks 500 Generation 2 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 20

HP StorageWorks 500 Generation 2 Скачать руководство пользователя страница 12

12

HP MSA 500 G2 Storage System Maintenance and Service Guide

−

In RAID 1+0 configurations, any drives that are not mirrored to other
removed or failed drives can be simultaneously replaced offline without
data loss.

To remove the component:

CAUTION: To prevent improper cooling and thermal damage,

do not operate the storage system unless all bays are populated with
either a component or a blank.

1. Determine the status of the hard drive from the hot-plug hard drive LEDs

("Hot-Plug SCSI Hard Drive LEDs" on page

2. Back up all data on the hard drive.

3. Remove the hard drive.

To replace the hot-plug SCSI hard drive:

1. Slide the drive into the cage until it clicks, locking the drive into place.

2. Close the lever.

3. Be sure that the drive LEDs illuminate one at a time and then turn off

together to indicate that the system has recognized the new drive.

In fault-tolerant configurations, allow the replacement drive to be
reconstructed automatically with data from the other drives. While
reconstruction is in progress, the online LED flashes.

«
...
10
11
12
13
14
...
»

Содержание StorageWorks 500 Generation 2





















Отзывы:

Нет отзывов