HP StorageWorks 2/140 - Director Switch, Руководство по обслуживанию

Страница: 104 / 396

Diagnostics
104 Director 2/140 Service Manual
At the HAFM master log, did the IP address below the director icon change to the
new entry and did the Ethernet connection recover?
NO YES
↓
The director-to-HAFM appliance connection is restored and is
operational. Exit MAP.
Contact the next level of support. Exit MAP.
23
An incorrect product type is defined to the HAFM appliance.
1. At the HAFM main window, right-click the icon with the grey square and
yellow exclamation point (representing the product reporting the problem) at
the Physical Map. A menu displays.
2. Choose Delete. A Warning dialog box displays, as shown in Figure 26 .
Figure 26: HAFM message dialog box
3. Click Yes to delete the director.
4. At the HAFM main window, choose Discover > Setup. The Discover Setup
dialog box displays, as shown in Figure 23 .
5. Click Add. The Domain Information dialog box displays with the IP Address
page open, as shown in Figure 25 .
6. Enter a description for the product in the Description field.
7. Enter the IP address in the IP Address field.
8. Enter the subnet mask associated with the IP address in the Subnet Mask
field.
9. Click OK.
10. Click OK to close the Discover Setup dialog box.
At the HAFM master log, did the IP address below the director icon change to the
new entry and did the Ethernet connection recover?
NO YES
↓
The director-to-HAFM appliance connection is restored and is
operational. Exit MAP.