HP Spectre x360 Convertible 13-ac000 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 75

HP Spectre x360 Convertible 13-ac000 Скачать руководство пользователя страница 55

Rear fan

Description

Spare part number

Rear fan (includes cable)

907333-001

NOTE:

To properly ventilate the computer, allow at least 7.6 cm (3 in) of clearance on the left side

of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature
sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are
affected by high external temperatures, system power consumption, power management/battery
conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced
through the ventilation grill located on the left side of the computer.

Before removing the rear fan, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation,
turn the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see

Bottom cover on page 24

), and then remove the following components:

a.

Battery (see

Battery on page 26

b.

Fan (see

Heat sink fan on page 30

).

c.

System board (see

System board on page 39

Remove the rear fan:

1.

Remove the webcam cable from the channel on the side of the fan (1).

2.

Remove the Phillips PM2.0×3.0 screw (2) that secures the fan to the computer.

3.

Rotate the side of the fan upward, and then remove the fan (3).

Reverse this procedure to install the rear fan.

Rear fan

47

«
...
53
54
55
56
57
...
»

Содержание Spectre x360 Convertible 13-ac000












































































Отзывы:

Нет отзывов