2.
Remove the rear-facing webcamera
(2)
and cable.
Reverse this procedure to install the rear-facing webcamera.
Antenna
Description
Spare part number
Antennna Kit (includes wireless antenna cable and transceiver and GPS antenna cable and
transceiver)
745231-001
Before removing the antenna, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the tablet cover (see
Tablet cover on page 12
).
5.
Disconnect the battery cable from the system board (see
Battery on page 15
).
Remove the antenna:
1.
Disconnect the wireless antenna cable
(1)
from the system board.
NOTE:
The wireless antenna cable must be unsoldered from the system board.
18
Chapter 4 Removal and replacement preliminary requirements
Содержание Slate 7 Plus
Страница 4: ...iv Safety warning notice ...
Страница 8: ...2 External component identification 2 Chapter 2 External component identification ...
Страница 38: ......
