Connecting to networks
You can connect to networks with either a wired (Ethernet) or wireless (Wi-Fi) connection. You cannot
enable Ethernet and Wi-Fi connections at the same time.
Connecting to wireless networks
The wireless network capability of the all-in-one lets you connect the all-in-one to wireless local area
networks (commonly referred to as Wi-Fi networks, wireless LANs, or WLANs). In a WLAN, the
mobile wireless module in your all-in-one communicates with a wireless router or a wireless access
point.
NOTE:
To set up a WLAN and connect to the Internet, you need a broadband modem (either DSL
or cable) (purchased separately), high-speed Internet service purchased from an Internet service
provider, and a wireless router (purchased separately).
To connect to a wireless network:
1.
Select the All Apps icon from the Home screen, and then select
Settings
.
NOTE:
The apps on the screen are arranged alphabetically.
2.
Select
Wi-Fi
.
3.
Select the
ON
button to turn the wireless radio on.
4.
Select your WLAN from the list.
NOTE:
If no WLANs are listed, you may be out of range of a wireless router or access point.
5.
If the WLAN is security-enabled, you are prompted to enter a security code. Type the code, and
then:
●
If proxy is not required, select
Connect
.
●
If proxy is required, select
Show advanced settings
. Next to Proxy settings, select
None
,
and then select
Manual
. Manually enter the proxy settings and select
Connect
.
Connecting to wired networks
Use a LAN connection if you want to connect the all-in-one directly to a router in your home (instead
of working wirelessly), or if you want to connect to an existing network at your office.
Connecting to a LAN requires an 8-pin, RJ-45 network cable.
To connect to a wired network:
1.
Plug the network cable into the network jack
(1)
on the all-in-one.
Connecting to networks
17
Содержание Slate 21 Pro
Страница 1: ...HP Slate 21 Pro All in One User Guide ...
Страница 4: ...iv About This Guide ...
Страница 8: ...viii ...
