HP SA3000 Series, Руководство по началу работы

Страница: 27 / 46

4-1
Hewlett-Packard SA3000 Series VPN Client Deployment Tool Getting Started Guide
Using the VPN Client Deployment Tool for the First Time
1
Using the VPN Client Deployment Tool
for the First Time
To use the HP SA3000 Series VPN Client Deployment Tool, you
must first perform the following tasks:
Tasks
• Create an E-mail template file that contains a generic
message to inform users that a new VPN Client configuration
is available. See "Creating an E-mail Template File"
(page 4-2).
• Start the VPN Client Deployment Tool Manager. See "Starting
the VPN Client Deployment Tool" (page 4-4).
• Log in to the VPN Client Deployment Tool Manager. See
"Logging In to the VPN Client Deployment Tool Manager"
(page 4-5).
• Add at least one corporation entry. See "Adding a
Corporation Entry" (page 4-6).
• Add at least one device entry that contains the name and IP
address of a device to be assigned to a user or group. See
"Adding a Device Entry" (page 4-8).
• Add at least one tunnel. You must include the device name
you are going to establish a tunnel with, the tunnel name,
authentication type, tunnel protocol, and port number. See
"Adding a Tunnel Entry" (page 4-9).
• Add at least one client profile. You must include the client
profile name, a tunnel association on the Client Profile Add/
Remove Tunnels List Window, and any additional tunnel
configurations. See "Creating a Client Profile" (page 4-11).
• At least one product profile. You must include a product
profile description, indicate which version of the VPN Client
software you want to deploy, which mode of user logon you
want to use, which type of access you want to use, and you
must indicate whether you want the VPN Client to be
minimized upon logon. See "Creating a Product Profile"
(page 4-13).
• Add at least one user or group profile to deploy information.
You must include the user name, description, and a valid e-
mail address. See "Adding a User or Group Entry"
(page 4-15).