HP R110, Руководство по настройке и администрированию

Страница: 77 / 142

VPN settings 77
L2TP over IPSec settings
The Layer 2 Tunneling Protocol is a common connection method used for VPN connections. You
can specify the detailed L2TP tunnel settings on the VPN connections page by clicking
Add
.
You can specify the Keep Alive time, which defines the time period without traffic after which
the PPP session is terminated. For a client tunnel, both host mode and router mode (LAN-to-
LAN) are supported. The tunnel can also be configured to automatically reconnect to the server
when Internet traffic is generated.
The VPN connections page displays when you click Add on the VPN Settings page. From the
VPN connection page you can configure detailed parameters for your L2TP over IPSec VPN
connection. A maximum of five L2TP connections can be defined.
This page includes the following settings:
VPN Tunnel Parameters
•
Tunnel Type : Select L2TP over IPSec as the tunnel type.
•
Tunnel Name : Enter a descriptive text name for the tunnel. (Do not use characters ` " & '
# \)
•
Username : Enter the user name for L2TP tunnel. (Do not use characters ` " & ' # \)
•
Password : Enter the password for the L2TP tunnel. (Do not use characters ` " & ' # \)
•
Confirm Password : Confirm the L2TP tunnel password.
•
Idle Timeout : Set the time after which the tunnel is closed when there is no activity.
L2TP Type Setting
•
L2TP Type : Sets the router to act as the L2TP server or client. When you set the type as
L2TP Client , you can then enter the Remote Server IP address.