HP PS110, Руководство по настройке и администрированию

Страница: 35 / 136

Settings 35
Static IP address
The Static IP address mode sets the router to operate with a fixed IP address to connect to the
Internet. If your ISP uses static IP addressing, you need an IP address, subnet mask, and ISP
gateway address. This information is available from your ISP or on the paperwork that your ISP
left with you. Enter your information in the provided spaces, and then click
Save
.
This page includes the following information:
Connection Type
Select Static IP Address as the router’s method of connecting to the ISP.
IP Address
Enter the IP address assigned to the router’s WAN port by the ISP.
Subnet Mask
Enter the IP subnet mask assigned to the router’s WAN port by the ISP.
Gateway
Enter the IP address of the ISP’s gateway.
Primary/Secondary DNS Address
Enter the IP addresses of primary and secondary domain name servers.
PPPoE
The Point-to-Point Protocol over Ethernet (PPPoE) is a common WAN protocol that provides a
secure “tunnel” connection between the service provider and the local network.
Enter the PPPoE information in the provided spaces, and then click Save to activate your
settings.