HP ProLiant WS460c Gen9 Скачать руководство пользователя страница 77 | Manualshive

Страница: 77 / 102

background image

Diagnostic tools 77

administrators who verify graphics server blade installations, troubleshoot problems, and perform repair

validation.
The Insight Diagnostics Offline Edition performs various in-depth system and component testing while

the OS is not running. To run this utility, boot the graphics server blade using Intelligent Provisioning.
The Insight Diagnostics Online Edition is a web-based application that captures system configuration

and other related data needed for effective graphics server blade management. Available in Microsoft

Windows and Linux versions, the utility helps to ensure proper system operation.
For more information or to download the utility, see the Hewlett Packard Enterprise website

http://www.hpe.com/servers/diags

).The Insight Diagnostics Online Edition is also available in the SPP.

HPE Insight Diagnostics survey functionality

HPE Insight Diagnostics (on page

) provides survey functionality that gathers critical hardware and

software information on ProLiant graphics server blades.
This functionality supports operating systems that are supported by the graphics server blade. For

operating systems supported by the graphics server blade, see the Hewlett Packard Enterprise website

http://www.hpe.com/info/supportos

If a significant change occurs between data-gathering intervals, the survey function marks the previous

information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every Intelligent Provisioning-assisted Insight Diagnostics

installation, or it can be installed through the SPP.

HPE Insight Remote Support

Hewlett Packard Enterprise strongly recommends that you register your device for remote support to

enable enhanced delivery of your Hewlett Packard Enterprise warranty, HP Care Pack Service, or

Hewlett Packard Enterprise contractual support agreement. Insight Remote Support supplements your

monitoring continuously to ensure maximum system availability by providing intelligent event diagnosis,

and automatic, secure submission of hardware event notifications to Hewlett Packard Enterprise, which

will initiate a fast and accurate resolution, based on your product’s service level. Notifications can be

sent to your authorized Hewlett Packard Enterprise Channel Partner for onsite service, if configured and

available in your country.
For more information, see

Insight Remote Support and Insight Online Setup Guide for ProLiant Servers

and BladeSystem c-Class Enclosures

on the Hewlett Packard Enterprise website

http://www.hpe.com/info/insightremotesupport/docs

). Insight Remote Support is available as part of

Hewlett Packard Enterprise Warranty, HP Care Pack Service, or Hewlett Packard Enterprise contractual

support agreement.

USB support

Hewlett Packard Enterprise graphics server blades support both USB 2.0 ports and USB 3.0 ports. Both

types of ports support installing all types of USB devices (USB 1.0, USB 2.0, and USB 3.0), but may run

at lower speeds in specific situations:

•

USB 3.0 capable devices operate at USB 2.0 speeds when installed in a USB 2.0 port.

•

When the graphics server blade is configured for UEFI Boot Mode, Hewlett Packard Enterprise

provides legacy USB support in the pre-boot environment prior to the operating system loading for

USB 1.0, USB 2.0 , and USB 3.0 speeds.

•

When the graphics server blade is configured for Legacy BIOS Boot Mode, Hewlett Packard

Enterprise provides legacy USB support in the pre-boot environment prior to the operating system

loading for USB 1.0 and USB 2.0 speeds. While USB 3.0 ports can be used with all devices in

«
...
75
76
77
78
79
...
»

Содержание ProLiant WS460c Gen9







































































































Отзывы:

Нет отзывов

Похожие инструкции для ProLiant WS460c Gen9

Бренд: IBM Страницы: 151

Бренд: IBM Страницы: 214

Бренд: A10 Networks Страницы: 17

Бренд: Patton electronics Страницы: 331

Бренд: Vicon Страницы: 2

Бренд: Longshine Страницы: 56

Бренд: I-O DATA Страницы: 49

Bull Escala E5-700

Бренд: IBM Страницы: 116

Бренд: Thecus Страницы: 120

WLNG-AN-DP500 Series

Бренд: Quatech Страницы: 120

Бренд: HPE Страницы: 258

HAM RADIO DELUXE

Бренд: Kenwood Страницы: 16

Бренд: 7th Sense Страницы: 156

@server x Series

Бренд: IBM Страницы: 8

ApplianceStor 90

Бренд: Rasilient Страницы: 42

Бренд: 4xem Страницы: 66

Бренд: Viavi Страницы: 4

Бренд: Kramer Страницы: 72

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды