HP ProLiant WS460c Gen9 Скачать руководство пользователя страница 76

Страница: 76 / 102

Diagnostic tools 76

Action

Key

Select items

Enter

Save selections

F10

Access Help for a highlighted configuration

option*

*Scan the QR code on the screen to access online help for the UEFI System Utilities and UEFI Shell.

Default configuration settings are applied to the server at one of the following times:

•

Upon the first system power-up

•

After defaults have been restored

Default configuration settings are sufficient for typical server operations; however, you can modify

configuration settings as needed. The system prompts you for access to the System Utilities each time

the system is powered up.

Embedded Diagnostics option

The system BIOS in all ProLiant Gen9 servers includes an Embedded Diagnostics option in the ROM.

The Embedded Diagnostics option can run comprehensive diagnostics of the server hardware,

including processors, memory, drives, and other server components.
For more information on the Embedded Diagnostics option, see the

UEFI System Utilities User Guide

for ProLiant Gen9 Servers

on the Hewlett Packard Enterprise website

(

http://www.hpe.com/info/ProLiantUEFI/docs

Re-entering the server serial number and product ID

After you replace the system board, you must re-enter the graphics server blade serial number and the

product ID.

During the graphics server blade startup sequence, press the

key to access UEFI System

Utilities.

Select the

System Configuration

BIOS/Platform Configuration (RBSU)

Advanced Options

Advanced System ROM Options

Serial Number

, and then press the

Enter

key.

Enter the serial number and press the

Enter

key. The following message appears:

The serial number should only be modified by qualified service

personnel. This value should always match the serial number located on

the chassis.

Press the

Enter

key to clear the warning.

Enter the serial number and press the

Enter

key.

Select

Product ID

. The following warning appears:

Warning: The Product ID should ONLY be modified by qualified service

personnel. This value should always match the Product ID located on the

chassis.

Enter the product ID and press the

Enter

key.

Press the

F10

key to confirm exiting System Utilities. The graphics server blade automatically

reboots.

HPE Insight Diagnostics

The Insight Diagnostics is a proactive graphics server blade management tool, available in both offline

and online versions, that provides diagnostics and troubleshooting capabilities to assist IT

Содержание ProLiant WS460c Gen9







































































































Результаты поиска

Содержание ProLiant WS460c Gen9

Отзывы:

Похожие инструкции для ProLiant WS460c Gen9

Бренды по названию

Популярные бренды

HP ProLiant WS460c Gen9, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание ProLiant WS460c Gen9

Отзывы:

Похожие инструкции для ProLiant WS460c Gen9

Бренды по названию

Популярные бренды