manualshive.com logo in svg

HP ProLiant MicroServer Gen8, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ProLiant MicroServer Gen8 Скачать руководство пользователя страница 64

 

Diagnostic tools  64 

Diagnostic tools 

Product QuickSpecs 

For more information about product features, specifications, options, configurations, and compatibility, see 
the product QuickSpecs on the HP website  

HP Insight Diagnostics 

HP Insight Diagnostics is a proactive server management tool, available in both offline and online versions, 

that provides diagnostics and troubleshooting capabilities to assist IT administrators who verify server 
installations, troubleshoot problems, and perform repair validation. 
HP Insight Diagnostics Offline Edition performs various in-depth system and component testing while the OS 

is not running. To run this utility, boot the server using Intelligent Provisioning. 
HP Insight Diagnostics Online Edition is a web-based application that captures system configuration and 

other related data needed for effective server management. Available in Microsoft Windows and Linux 
versions, the utility helps to ensure proper system operation. 
For more information or to download the utility, see the HP websiteInsight Diagnostics Online Edition is also available in the SPP. 

 

HP Insight Diagnostics survey functionality 

HP Insight Diagnostics (on page 

64

) provides survey functionality that gathers critical hardware and software 

information on ProLiant servers. 
This functionality supports operating systems that are supported by the server. For operating systems 
supported by the server, see the HP website If a significant change occurs between data-gathering intervals, the survey function marks the previous 

information and overwrites the survey data files to reflect the latest changes in the configuration. 
Survey functionality is installed with every Intelligent Provisioning-assisted HP Insight Diagnostics installation, 
or it can be installed through the SPP. 

 

HP Insight Remote Support software 

HP strongly recommends that you register your device for remote support to enable enhanced delivery of 

your HP Warranty, HP Care Pack Service, or HP contractual support agreement. HP Insight Remote Support 
supplements your monitoring continuously to ensure maximum system availability by providing intelligent 

event diagnosis, and automatic, secure submission of hardware event notifications to HP, which will initiate 

a fast and accurate resolution, based on your product’s service level. Notifications may be sent to your 

authorized HP Channel Partner for onsite service, if configured and available in your country. 
For more information, see 

HP Insight Remote Support and Insight Online Setup Guide for ProLiant Gen8 

Servers and BladeSystem c-Class Enclosures

 on the HP website 

Содержание ProLiant MicroServer Gen8

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды