HP ProLiant DL80 Gen9, Руководство по техническому обслуживанию и ремонту

Страница: 51 / 124

Removal and replacement procedures 51
IMPORTANT: If installing a processor with a faster speed, update the system ROM before
installing the processor.
IMPORTANT: Processor socket 1 must be populated at all times or the server does not function.
To remove the component:
1.
Power down the server (on page 26 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
o
Extend the server from the rack (on page 27 ).
o
Remove the server from the rack (on page 29 ).
4.
Remove the access panel (" Access panel " on page 34 ).
5.
Remove the air baffle (" Air baffle " on page 35 ).
6.
Remove the heatsink (" Heatsink " on page 48 ).
7.
Open each of the processor locking levers in the order indicated, and then open the processor retaining
bracket.
CAUTION: THE PINS ON THE SYSTEM BOARD ARE VERY FRAGILE AND EASILY DAMAGED. To
avoid damage to the system board, do not touch the processor or the processor socket contacts.