System Unit
System Unit
System Unit
System Unit
Dimensions
Dimensions
Dimensions
Dimensions (HxWxD)
(with feet/bezel)
3.38 x 17.54 x 26.01 in (8.59 x 44.54 x 66.07 cm)
Weight
Weight
Weight
Weight (approximate)
Maximum
Maximum
Maximum
Maximum
(all hard drives, power
supplies, and processors
installed)
60 lb (27.22 kg)
Minimum
Minimum
Minimum
Minimum
(one hard drive, power
supply, and processor
installed)
47.18 lb (20.41 kg)
Input Requirements
Input Requirements
Input Requirements
Input Requirements
(per power supply)
Rated Line Voltage
Rated Line Voltage
Rated Line Voltage
Rated Line Voltage
100 VAC, 120VAC
200-240 VAC
Rated Input Current
Rated Input Current
Rated Input Current
Rated Input Current
10A (at 100 VAC)
9A (at 120 VAC)
6.1A (at 200 VAC)
Rated Input Frequency
Rated Input Frequency
Rated Input Frequency
Rated Input Frequency
50 to 60 Hz
Rated Input Power
Rated Input Power
Rated Input Power
Rated Input Power
980W (at 100 VAC)
1035W (at 120 VAC)
1170 W (at 240 VAC)
BTU Rating
BTU Rating
BTU Rating
BTU Rating
BTU/HR
BTU/HR
BTU/HR
BTU/HR
3350 BTU/hr (at 100 VAC)
3530 BTU/hr (at 120 VAC)
3990 BTU/hr (at 240 VAC)
Power Specifications
Power Specifications
Power Specifications
Power Specifications
To review typical system power ratings use the Active Answers Power
Calculator which is available via the online tool located at URL:
http://h30099.www3.hp.com/configurator/
calc/Power%20Calculator%20Catalog.xls
Click on the Server of interest. Example: DL385 G2
Follow the instructions of the next screens.
Power Supply Output
Power Supply Output
Power Supply Output
Power Supply Output
Power
Power
Power
Power
(per power supply)
Rated Steady-State Power
Rated Steady-State Power
Rated Steady-State Power
Rated Steady-State Power 800 W (at 100 VAC)
850 W (at 120 VAC)
1000 W (at 200-240 VAC)
Maximum Peak Power
Maximum Peak Power
Maximum Peak Power
Maximum Peak Power
800 W (at 100 VAC)
850 W (at 120 VAC)
1000 W (at 200-240 VAC)
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature
System Inlet Temperature Operating
Operating
Operating
Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
Non-operating
Non-operating
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
QuickSpecs
HP ProLiant DL385 Generation 2 (G2)
HP ProLiant DL385 Generation 2 (G2)
HP ProLiant DL385 Generation 2 (G2)
HP ProLiant DL385 Generation 2 (G2)
Technical Specifications
DA - 12565 North America — Version 22 — July 25, 2007
Page 37
