HP ProLiant DL380 G6 Server Скачать руководство пользователя страница 22

Страница: 22 / 117

Operations 22

Operations

Power up the server

To power up the server, press the Power On/Standby button.

Power down the server

WARNING:

To reduce the risk of personal injury, electric shock, or damage to the equipment,

remove the power cord to remove power from the server. The front panel Power On/Standby

button does not completely shut off system power. Portions of the power supply and some internal

circuitry remain active until AC power is removed.

IMPORTANT:

If installing a hot-plug device, it is not necessary to power down the server.

Back up the server data.

Shut down the operating system as directed by the operating system documentation.

NOTE:

If the operating system automatically places the server in Standby mode, omit the next

step.

Press the Power On/Standby button to place the server in Standby mode. When the server activates
Standby power mode, the system power LED changes to amber.

IMPORTANT:

Pressing the UID button illuminates the blue UID LEDs on the front and rear panels.

In a rack environment, this feature facilitates locating a server when moving between the front and

rear of the rack.

Disconnect the power cords.

The system is now without power.

Extend the server from the rack

Pull down the quick release levers on each side of the server.

Extend the server from the rack.

WARNING:

To reduce the risk of personal injury or equipment damage, be sure that the rack is

adequately stabilized before extending a component from the rack.

Содержание ProLiant DL380 G6 Server






















































































































Результаты поиска

Содержание ProLiant DL380 G6 Server

Отзывы:

Похожие инструкции для ProLiant DL380 G6 Server

Бренды по названию

Популярные бренды

HP ProLiant DL380 G6 Server, Руководство пользователя

Результаты поиска

Содержание ProLiant DL380 G6 Server

Отзывы:

Похожие инструкции для ProLiant DL380 G6 Server

Бренды по названию

Популярные бренды