Memory
One of the following
depending on Model
Type
HP SmartMemory
DDR3 Load Reduced (LRDIMM), Registered (RDIMM) or Unbuffered (UDIMM)
Standard (Entry Models -
SAS)
4GB (1 x 4GB) Registered DIMMs PC3L-10600R (1333MHz) or 4GB (1 x 4GB)
Registered DIMMs PC3L-12800R (1600MHz)
Standard (Entry Models -
SATA)
4GB (1 x 4GB) Registered DIMMs PC3L-10600R (1333MHz) or 4GB (1 x 4GB)
Registered DIMMs PC3L-12800R (1600MHz)
Standard (Base Models)
8GB (2 x 4GB) Registered DIMMs PC3L-10600R (1333MHz) or 8GB (1 x 8GB)
Registered DIMMs PC3L-12800R (1600MHz)
Maximum Capacity
(LRDIMM)
384GB (12 x 32GB LRDIMM @1333MHz)
Maximum Capacity
(RDIMM)
192GB (12 x 16GB RDIMM @1600MHz or 1333MHz)
Maximum Capacity
(UDIMM)
96GB (12 x 8GB UDIMM @1333MHz)
NOTE:
HP memory from previous generation servers are not fully compatible with the HP ProLiant DL360e
Gen8 Server.
NOTE:
To realize the performance memory capabilities listed in this document, HP SmartMemory is
required. For additional information, please see the HP SmartMemory QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/14225_div/14225_div.html
NOTE:
If only one processor is installed, only 6 DIMM slots are available. When populating with two
processors 12 DIMM slots are available
NOTE:
Depending on the memory configuration and processor model, the memory speed may run at
1600MHz, 1333MHz, or 1066MHz. Please see Memory Population Table or the Online Memory
Configuration Tool at:
www.hp.com/go/ddr3memory-configurator
.
Network Controller
HP Ethernet 1Gb 4-port 366i Adapter
NOTE:
The HP ProLiant DL360e Gen8 server offers the customer a quad-port NIC standard with the option
to upgrade with a variety of networking options.
Expansion Slots
Expansion
Slots #
Technology
Bus
Width
*
Connector
Width
Form Factor
Notes
1
PCIe 3.0
x16
x16
Full-height, half-
length slot
(250mm)
2
PCIe 2.0
x4
x8
Low profile slot
*Indicates the number of physical electrical lanes running to the connector.
QuickSpecs
HP ProLiant DL360e Generation 8 (Gen8)
Standard Features
DA - 14327 North America — Version 36 — January 22, 2014
Page 4