Hardware options installation 67
6.
Install the TPM board. Press down on the connector to seat the board ("
System board components
" on
page
10
).
7.
Install the TPM security rivet by pressing the rivet firmly into the system board.
8.
Install the PCI riser cage (on page
21
).
9.
Install the access panel (on page
20
).
10.
Install the server into the rack ("
Installing the server into the rack
" on page
27
).
11.
Power up the server (on page
17
).
Retaining the recovery key/password
The recovery key/password is generated during BitLocker™ setup, and can be saved and printed after
BitLocker™ is enabled. When using BitLocker™, always retain the recovery key/password. The recovery
key/password is required to enter Recovery Mode after BitLocker™ detects a possible compromise of system
integrity.
To help ensure maximum security, observe the following guidelines when retaining the recovery
key/password:
Содержание ProLiant DL360e Gen8
