NOTE:
NOTE:
NOTE:
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for information on CTO
product offerings and requirements.
NOTE:
NOTE:
NOTE:
NOTE: HP does not allow factory integration of options into standard models listed above.
Configure-to-order servers must start with a CTO Chassis.
NOTE:
NOTE:
NOTE:
NOTE: FIO indicates that this option is available only as a Factory Installable Option.
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
Step 1: Base Server Blade Configuration
Models
Models
Models
Models
HP ProLiant BL685c G6 CTO Blade (North America)
491338-B21
Two (2) embedded NC532i Dual Port Flex-10 10GbE Multifunction Server Adapters
and one (1) additional 10/100 server adapter dedicated to iLO 2 management
Two (2) small form factor (SFF) SAS/SATA hot plug hard drive bays
Two (2) non-hot plug internal SATA SSD drive bays
HP Embedded SATA Controller
ProLiant Onboard Administrator
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
Step 2: Choose Required Options (one of the following from each list unless otherwise noted)
Processors
Processors
Processors
Processors
For dual (2) processor configurations choose (one of the following):
For dual (2) processor configurations choose (one of the following):
For dual (2) processor configurations choose (one of the following):
For dual (2) processor configurations choose (one of the following):
AMD Opteron™ processor Model 8435 (2.6 GHz, 6 MB L3 Cache, 75W ACP)
Processor Option Kit, FIO Base
NOTE:
NOTE:
NOTE:
NOTE: If four (4) processors are desired, select one 539816-L21 and one 539816-
B21.
539816-L21
AMD Opteron processor Model 8431 (2.4 GHz, 6 MB L3 Cache, 75W ACP)
Processor Option Kit, FIO Base
NOTE:
NOTE:
NOTE:
NOTE: If four (4) processors are desired, select one 539819-L21 and one 491341-
B21.
539819-L21
AMD Opteron processor Model 8389 (2.9 GHz, 6 MB L3 Cache, 75W ACP)
Processor Option Kit, FIO Base
NOTE:
NOTE:
NOTE:
NOTE: If four (4) processors are desired, select one 491341-L21 and one 491341-
B21.
491341-L21
AMD Opteron processor Model 8387 (2.8 GHz, 6 MB L3 Cache, 75W ACP)
Processor Option Kit, FIO Base
NOTE:
NOTE:
NOTE:
NOTE: If four (4) processors are desired, select one 491343-L21 and one 491343-
B21.
491343-L21
Low Power AMD Opteron processor Model 8381 HE (2.5 GHz, 6 MB L3 Cache,
55W ACP) Processor Option Kit, FIO Base
NOTE:
NOTE:
NOTE:
NOTE: If four (4) processors are desired, select one 508864-L21 and one 508864-
B21.
508864-L21
Memory
Memory
Memory
Memory
2 GB REG PC2-6400 DDR2 2 x 1 GB Kit
497763-B21
4 GB REG PC2-6400 DDR2 2 x 2 GB Kit
497765-B21
8 GB REG PC2-6400 DDR2 2 x 4 GB Kit
497767-B21
8 GB REG PC2-6400 DDR2 2 x 4 GB Low Power Kit
504351-B21
16 GB REG PC2-5300 DDR2 2 x 8 GB Dual Rank Kit
408855-B21
64 GB REG PC2-5300 DDR2 8 x 8 GB Dual Rank Kit
495605-B21
NOTE:
NOTE:
NOTE:
NOTE: Must be installed in pairs.
QuickSpecs
HP ProLiant BL685c Generation 6 (G6) Server Blade
HP ProLiant BL685c Generation 6 (G6) Server Blade
HP ProLiant BL685c Generation 6 (G6) Server Blade
HP ProLiant BL685c Generation 6 (G6) Server Blade
Configuration Information - Factory Integrated Models
DA - 13243 Worldwide — Version 2 — June 2, 2009
Page 17
