HP ProLiant BL620c Generation 7, Краткие характеристики

Страница: 39 / 42

System Unit System Unit System Unit System Unit Dimensions Dimensions Dimensions Dimensions
(H x W x D) Full height, single-wide server blade:
14.46 x 2.19 x 20.09 in (36.73 x 5.49 x 51.03 cm)
Weight Weight Weight Weight
(approximate) Maximum
(all hard drives, DIMMs,
mezzanine cards, and
processors installed) 24.24lbs (11.00kg)
Minimum
(two hard drives, four
DIMMs, no mezzanine
cards, and two processors
installed) 17.9lbs (8.12kg)
Power Specifications Power Specifications Power Specifications Power Specifications For power specifications including input requirements, BTU rating, and
power supply output, please see the HP BladeSystem c-Class Enclosures
QuickSpecs located at:
HP BladeSystem c3000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12790_div/
12790_div.html
(Worldwide)
HP BladeSystem c7000 Enclosure QuickSpecs:
http://h18000.www1.hp.com/products/quickspecs/12810_div/
12810_div.html
(Worldwide)
To review typical system power ratings use the HP BladeSystem Power Sizer
available at:
http://www.hp.com/go/bladesystem/powercalculator .
System Inlet Temperature System Inlet Temperature System Inlet Temperature System Inlet Temperature Operating 10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed. System performance may be reduced if
operating with a fan fault or above 30°C (86°F).
Non-Operating -30° to 60°C (-22° to 140°F), maximum rate of
change is 20°C/hr (36°F/hr).
Relative Humidity Relative Humidity Relative Humidity Relative Humidity
(non-condensing) Operating 10 to 85% relative humidity (Rh), 28°C (82.4°F)
maximum wet bulb temperature, non-
condensing.
Non-Operating 10 to 95% relative humidity (Rh), 38.7°C
(101.7°F) maximum wet bulb temperature, non-
condensing.
Altitude Altitude Altitude Altitude Operating 3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
m/min (1500 ft/min).
Non-operating 9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
QuickSpecs
HP ProLiant BL620c Generation 7 (G7) Server Blade HP ProLiant BL620c Generation 7 (G7) Server Blade HP ProLiant BL620c Generation 7 (G7) Server Blade HP ProLiant BL620c Generation 7 (G7) Server Blade
Technical Specifications
DA - 13747 Worldwide — Version 16 — September 26, 2011 Page 39