NOTE:
NOTE:
NOTE:
NOTE: Some options may not be integrated at the factory. To ensure only valid configurations are ordered, HP recommends the use
of an HP approved configurator. Contact your local sales representative for additional information.
HP Ethernet Mezzanine
HP Ethernet Mezzanine
HP Ethernet Mezzanine
HP Ethernet Mezzanine
Options
Options
Options
Options
Gigabit Ethernet Mezzanines
Gigabit Ethernet Mezzanines
Gigabit Ethernet Mezzanines
Gigabit Ethernet Mezzanines
HP NC325m PCI Express Quad Port 1Gb Server Adapter for c-Class BladeSystem
NOTE:
NOTE:
NOTE:
NOTE: If the NC325m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on only 2 of the 4 ports.
416585-B21
HP NC326m PCI Express Dual Port 1Gb Server Adapter for c-Class BladeSystem
406771-B21
HP NC360m Dual Port 1GbE BL-c Adapter
445978-B21
HP NC364m Quad Port 1GbE BL-c Adapter
NOTE:
NOTE:
NOTE:
NOTE: If the NC364m is installed in mezzanine slot 1 of a half-height server,
connectivity will be provided on only 2 of the 4 ports.
447883-B21
HP NC382m Dual Port 1GbE Multifunction BL-c Adapter
453246-B21
QLogic iSCSI Dual Port Adapter with Virtual Connect for c-Class BladeSystem
488074-B22
NOTE:
NOTE:
NOTE:
NOTE: The Gigabit Ethernet adapters above transmit from the server at 2000 Mbps,
full duplex per port. For more information, see the "Network Controller" segment in
the Standards Features section.
10 Gigabit Ethernet Mezzanines
10 Gigabit Ethernet Mezzanines
10 Gigabit Ethernet Mezzanines
10 Gigabit Ethernet Mezzanines
NOTE:
NOTE:
NOTE:
NOTE: A 10 Gigabit Ethernet adapter is required for each server blade connecting to
a 10Gb interconnect in bays 3-8 (HP BladeSystem c7000 Enclosure) or bays 2-4 (HP
BladeSystem c3000 Enclosure).
NOTE:
NOTE:
NOTE:
NOTE: Each 10 Gigabit Ethernet adapter requires a minimum of 2GB of server
memory.
NOTE:
NOTE:
NOTE:
NOTE: Each 10 Gigabit Either adapter supports linking at 1000Mbps or 10000Mbps
when not connected to a Flex-10 enabled module and will link with all current 1Gb
switches at 1Gb.
NOTE:
NOTE:
NOTE:
NOTE: The ROM Based Setup Utility (RBSU) feature allows for the configuring of a
FlexFabric Adapter to any of the supported protocols. For example iSCSI to FCoE
(Fibre Channel over Ethernet). Note that a HP Virtual Connect profile takes
precedence over the setting in this menu. Also, some FlexFabric Adapters may require
that network boot be enabled in order to configure the protocol. If the protocol is
configured without enabling network boot with certain FlexFabric Adapters, the
protocol may not take effect. Once the protocol has taken effect on the first boot after
configuring this option, network boot may be disabled if desired.
HP NC522m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
467801-B21
HP NC532m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
467799-B21
HP NC542m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
539857-B21
HP NC550m 10GbE 2-port PCIe x8 Flex-10 Ethernet Adapter
581204-B21
HP BLc NC552m Flex-10GbE Dual Port Adapter
610609-B21
HP NC553m 10Gb 2-port FlexFabric Adapter
613431-B21
HP Fibre Channel
HP Fibre Channel
HP Fibre Channel
HP Fibre Channel
Mezzanine Options
Mezzanine Options
Mezzanine Options
Mezzanine Options
Fibre Channel Mezzanine Options
Fibre Channel Mezzanine Options
Fibre Channel Mezzanine Options
Fibre Channel Mezzanine Options
Emulex LPe1105 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
403621-B21
QLogic QMH2462 4Gb Fibre Channel Host Bus Adapter for c-Class BladeSystem
403619-B21
QuickSpecs
HP ProLiant BL495c Generation 6 (G6) Server Blade
HP ProLiant BL495c Generation 6 (G6) Server Blade
HP ProLiant BL495c Generation 6 (G6) Server Blade
HP ProLiant BL495c Generation 6 (G6) Server Blade
Core Options
DA - 13346 Worldwide — Version 13 — January 10, 2011
Page 17
