HP ProLiant BL360 G5, Руководство по техническому обслуживанию и ремонту

Страница: 38 / 60

Removal and replacement procedures 38
7.
Install the heatsink.
8.
Install the hard drive cage/bezel assembly (" Hard drive cage/bezel assembly " on page 27 ).
9.
Install the access panel (" Access panel " on page 24 ).
10.
Install the server blade.
System board
To remove the component:
1.
Power down the server blade (on page 23 ).
2.
Remove the server blade (on page 23 ).
3.
Remove the access panel (" Access panel " on page 24 ).
4.
Remove all DIMMs (" DIMMs " on page 24 ).
5.
Remove the air baffle (" Air baffle " on page 24 ).
6.
Remove the mezzanine card (" Mezzanine card " on page 25 ).
7.
Remove the battery tray (" Battery tray " on page 26 ).
8.
Remove the hard drive cage/bezel assembly (" Hard drive cage/bezel assembly " on page 27 ).
9.
Remove the heatsink (" Heatsink " on page 31 ).