manualshive.com logo in svg

HP ProLiant BL20p, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ProLiant BL20p Скачать руководство пользователя страница 33

Removal and Replacement Procedures 

SCSI Backplane 

To remove the SCSI backplane: 

1.  Power down the server blade and remove it from the server blade enclosure. Refer to the 

“Server Blade Preparation” section in this chapter. 

2.  Remove the access panel. Refer to “Access Panel” in this chapter. 

3.  Remove any hot-plug SCSI hard drives or hard drive blanks: 

—  If any hard drive blanks are installed, refer to the “Hard Drive Blanks” section in this 

chapter. 

—  If any hot-plug SCSI hard drives are installed, refer to the “Hot-Plug SCSI Hard 

Drives” section in this chapter. 

4.  Remove the fan assembly. Refer to “Fan Assembly” in this chapter. 

5.  Disconnect the power button/LED board cable from the SCSI backplane (1). 

6.  Grasp the SCSI backplane on the left side when facing the rear of the server blade, and 

lift slightly to rotate the SCSI backplane out (2). 

7.  Lift the SCSI backplane out of the chassis (3). 

 

Figure 2-21:  Removing the SCSI backplane 

HP ProLiant BL20p Generation 2 Server Blade Maintenance and Service Guide 

2-21

 

  

 

HP CONFIDENTIAL

 Codename:  Part Number: 316078-001 Last Saved On: 4/3/03 1:22 PM 

 

Содержание ProLiant BL20p





























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды