manualshive.com logo in svg

HP ProLiant BL e-Class, Руководство по техническому обслуживанию и ремонту, Страница: 35 / 84

Поделиться
Скачать
HP ProLiant BL e-Class Скачать руководство пользователя страница 35

Removal and Replacement Procedures 

14.  Press the fan cage removal latch on top of the fan cage (1). 

15.  Remove the fan cage from the enclosure (2). 

 

Figure 2-14:  Removing the fan cage from the enclosure 

Reverse steps 1 through 15 to replace the fan cage. 

Fan Backplane Assembly 

To remove the fan backplane assembly: 

1.  Power down each server blade. See the “Powering Down a Server Blade” section in this 

chapter. 

2.  Power down the enclosure. See the “Powering Down the Enclosure” section in this 

chapter. 

3.  Disconnect all cables and power cords from the AC power source. 

4.  Disconnect all cables and power cords from the enclosure rear panel. 

5.  Remove all server blades. See the “Removing a Server Blade” section in this chapter. 

 

 

CAUTION:

  Integrated Administrator security settings are assigned to server blade bays, not 

to server blades. If server blades change locations within the enclosure, Integrated 
Administrator settings must also be adjusted to ensure accurate security. Refer to the 

HP 

ProLiant BL e-Class Integrated Administrator User Guide

 for more information on security 

settings. 

6.  Remove both hot-plug power supplies. See the “Hot-Plug Power Supplies” section in this 

chapter. 

7.  Remove the interconnect tray. See the “Removing the Interconnect Tray” section in this 

chapter. 

2-20

 

HP ProLiant BL e-Class System Maintenance and Service Guide 

  

 

HP CONFIDENTIAL

 Codename: Kerr Part Number: 249066-004 Last Saved On: 5/12/03 3:00 PM 

 

Содержание ProLiant BL e-Class





















































































Отзывы:

Нет отзывов