Figure 43 Folder Properties page, General tab
2.
On the
General
tab, enter the new information for the folder.
3.
On the
Compress
tab, indicate whether this folder and its contents are to be compressed, and
if so, how.
4.
After all changes have been completed, click
OK
.
Creating a new share for a volume or folder
Within the WebUI, there are two access points to the same screens used to create file shares:
•
A share can be created for a folder while working with that folder in the
Folders
page.
•
A share can be created and, if necessary, new folders can be created, while working with file
shares on the
Shares
page.
This section discusses creating shares from the
Folders
page, and is an overview of the procedures.
Complete details on the process of creating shares are included in the discussion that documents creating
shares through the
Shares
tab. See the “
” section of this chapter for these details.
NOTE:
On select servers this function operates in a cluster but should only be used for non-cluster aware shares.
Use Cluster Administrator to create shares for a cluster.
To create a new share for a specific volume or folder while on the
Folders
page:
1.
Navigate to the desired volume or folder, and then click
Manage Shares
.
2.
Click
New
.
90
Folder, Printer, and Share Management
Содержание ProLiant 300 Series
