HP ProCurve Series 2810, Руководство по управлению и настройке

Страница: 253 / 420

Configuring for Network Management Applications
Using SNMP Tools To Manage the Switch
Figure 12-4 shows the assigning of the Operator community on MgrStation1
to the
CommunityOperatorReadWrite
group. Any other Operator only has an
access level of
CommunityOperatorReadOnly.
Add mapping to allow write access for
Operator community on MgrStation1
Two Operator Access Levels
Figure 12-4. Assigning a Community to a Group Access Level
Table 12-1. SNMP Community Features
Feature Default Menu CLI Web
show
SNMP
communities n/a page
12-14
page
12-16
—
configure identity information none — page
12-17
configure community names
MIB view for a community name
(operator, manager)
write access for default
community name
public
manager
unrestricted
page
12-14
“
“
“
page
12-17
“
“
“
—
Use SNMP communities to restrict access to the switch by SNMP management
stations by adding, editing, or deleting SNMP communities. You can configure
up to five SNMP communities, each with either an operator-level or a manager-
level view, and either restricted or unrestricted write access.
Using SNMP requires that the switch have an IP address and subnet mask
compatible with your network.
12-13