SROS Command Line Interface Reference Guide
Enable Mode Command Set
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
160
show atm [pvc | traffic] interface atm
<interface>
Use the
show atm
command to display information specific to the ATM interface.
Variations of this command include the following:
show atm pvc
show atm [pvc | traffic] interfaces atm
<interface>
Syntax Description
pvc
Shows ATM PVC information.
traffic
Shows ATM traffic information.
<sub-interface number>
For ATM PVC information, enter the sub-interface (x.x) number.
<atm port interface>
For ATM port traffic information, enter the port ATM number 1-1023.
<atm vcl interface>
For ATM VCL traffic information, enter the ATM VCL number 1-1023.1-65536.
Default Values
No default is necessary for this command.
Usage Examples
The following is sample output from this command:
ProCurve>
enable
ProCurve#
show atm pvc interface atm 1.1
Encap
Peak
Avg/Min Burst
Name
VPI
VCI
Type
SC
Kbps
Kbps
Cells
Status
atm 1.1
0
200
SNAP
N/A
0
0
0
Active
Содержание ProCurve Secure 7102dl
Страница 2: ......
Страница 3: ...SROS Command Line Interface Reference Guide Software Version J 08 03 September 2007 61195880L1 35H ...
Страница 1454: ......