SROS Command Line Interface Reference Guide
Router (OSPF) Configuration Command Set
5991-2114
© Copyright 2007 Hewlett-Packard Development Company, L.P.
1374
timers spf
<delay> <hold>
Use the
timers spf
command to configure the shortest path first (SPF) calculation and hold intervals.
Syntax Description
<delay>
Specifies time in seconds between OSPF’s receipt of topology changes and the
beginning of SPF calculations.
<hold>
Specifies time in seconds between consecutive SPF calculations.
Range: 10 to 1800 seconds.
Default Values
<delay>
5 seconds
<hold>
10 seconds
Usage Examples
The following example defines a delay of 10 seconds and a hold-time of 30 seconds:
ProCurve(config)#
router ospf
ProCurve(config-ospf)#
timers spf 10 30
Содержание ProCurve Secure 7102dl
Страница 2: ......
Страница 3: ...SROS Command Line Interface Reference Guide Software Version J 08 03 September 2007 61195880L1 35H ...
Страница 1454: ......