PoE power
398 W
RPS power
185 W
PoE power
398 W
Frequency
50/60 Hz
Notes
Maximum power rating and maximum heat
dissipation are the worst-case theoretical
maximum numbers provided for planning the
infrastructure with fully loaded PoE (if equipped),
100% traffic, all ports plugged in, and all modules
populated.
PoE Power is the power supplied by the internal
power supply, it is dependent on the type and
quantity of power supplies and may be
supplemented with the use of a External Power
Supply (EPS).
200-240 V power cords shipped with the 630
power supply have a wall plug rated as close to 13
A as specific country standards allow.
Notes
The HP 630 RPS/EPS supports the HP 2910al and 3500yl-PoE+ Switches. The
HP Switch 5400zl Series is not supported.
The 630 RPS/EPS includes two 2-m RPS/EPS cables, which can bes used to
carry either RPS or PoE+ power to the switch.
Minimum software versions required: 2910al PoE+ switches require W.14.35
or later and 3500yl-PoE+ switches require K.14.52 or later
Services
3-year, 4-hour onsite, 13x5 coverage for hardware (U9270E)
3-year, 4-hour onsite, 24x7 coverage for hardware (U9271E)
4-year, 4-hour onsite, 13x5 coverage for hardware (UR854E)
4-year, 4-hour onsite, 24x7 coverage for hardware (UR855E)
5-year, 4-hour onsite, 13x5 coverage for hardware (UR857E)
5-year, 4-hour onsite, 24x7 coverage for hardware (UR858E)
3 Yr 6 hr Call-to-Repair Onsite (UW371E)
4 Yr 6 hr Call-to-Repair Onsite (UW372E)
5 Yr 6 hr Call-to-Repair Onsite (UW373E)
Refer to the HP website at:
www.hp.com/networking/services
for details on
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
QuickSpecs
HP 3500 and 3500 yl Switch Series
Accessory Product Details
DA - 13282 North America — Version 20 — January 17, 2014
Page 71
