HP ProCurve 2800 Series, Руководство пользователя

Страница: 148 / 300

Configuring Secure Shell (SSH)
Configuring the Switch for SSH Operation
SSH Client Contact Behavior. At the first contact between the switch and
an SSH client, if you have not copied the switch’s public key into the client,
your client’s first connection to the switch will question the connection and,
for security reasons, give you the option of accepting or refusing. As long as
you are confident that an unauthorized device is not using the switch’s IP
address in an attempt to gain access to your data or network, you can accept
the connection. (As a more secure alternative, you can directly connect the
client to the switch’s serial port and copy the switch’s public key into the client.
See the following Note.)
N o t e
When an SSH client connects to the switch for the first time, it is possible for
a "man-in-the-middle" attack; that is, for an unauthorized device to pose
undetected as the switch, and learn the usernames and passwords controlling
access to the switch. You can remove this possibility by directly connecting
the management station to the switch’s serial port, using a
show command to
display the switch’s public key, and copying the key from the display into a
file. This requires a knowledge of where your client stores public keys, plus
the knowledge of what key editing and file format might be required by your
client application. However, if your first contact attempt between a client and
the switch does not pose a security problem, this is unnecessary.
To enable SSH on the switch.
1. Generate a public/private key pair if you have not already done so. (Refer
to “2. Generating the Switch’s Public and Private Key Pair” on page 6-10.)
2. Execute the
ip ssh
command.
To disable SSH on the switch, do either of the following:
■
Execute no ip ssh .
■
Zeroize the switch’s existing key pair. (page 6-11).
Syntax: [no] ip ssh
Enables or disables SSH on the switch.
[key-size < 512 | 768 | 1024 >] Version 1 only
The size of the internal, automatically generated key
the switch uses for negotiations with an SSH client. A
larger key provides greater security; a smaller key
results in faster authentication (default: 512 bits).
6-16