manualshive.com logo in svg

HP ProBook 450 G2, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP ProBook 450 G2 Скачать руководство пользователя страница 66

Display subcomponents (bezel, webcam, panel)

This section describes removing display subcomponents that do not require that you remove the entire 
display assembly from the computer. You can remove the display bezel, webcam/microphone module, and 
display panel while the display assembly is still attached to the computer.

To remove the remaining display subcomponents, you must remove the entire display assembly from the 
computer. See 

Display assembly on page 88

 for more information about removing the display assembly in 

its entirety.

Before removing display subcomponents while the display assembly is still attached to the computer, follow 
these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

4.

Remove the battery (see 

Battery on page 36

).

To remove the display bezel, webcam/microphone module, and raw display panel:

1.

Position the computer upright with the front toward you, and then open it.

2.

To remove the display bezel, remove the 2 mylar screw covers (1) and the 2 Phillips PM2.0×3.0 screws 
(2) in the bottom corners of the display bezel.

3.

Flex the top (3) of the bezel, the inside edges of the left and right sides (4), and then the bottom (5) of 
the bezel until it disengages from the display enclosure.

NOTE:

Make sure the hinges are not bent (see hinge position in following image) when you remove the 

bezel.

4.

If you need to remove the display bezel, remove the 2 mylar screw covers (1) and the 2 Phillips 
PM2.0×3.0 screws (2) in the bottom corners of the display bezel.

5.

Flex the top (3) of the bezel, the inside edges of the left and right sides (4), and then the bottom (5) of 
the bezel until it disengages from the display enclosure.

54

Chapter 6   Removal and replacement procedures for Authorized Service Provider parts

Содержание ProBook 450 G2










































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды