background image

1.

Go to 

http://www.hp.com/support

, and then search for your computer by product name or number.

2.

Select Product Information.

3.

Refer to the listed options to determine which card to purchase.

Inserting a SIM card in an external slot

To insert a SIM card in an external slot, follow these steps.

1.

Turn off the computer by using the Shut down command.

2.

Insert the SIM card into the SIM card slot, and then press in on the SIM card until it is firmly seated.

NOTE:

Your SIM card or the SIM card slot in your computer might look different from the illustration in 

this section.

NOTE:

Your SIM card slot may have an icon to show which way the card should be inserted into the 

computer.

To remove the SIM card, press in gently on the card to disengage the SIM lock, and then remove it from the 

slot.

Memory modules

To remove the memory modules, use this procedure and illustration.

Table 5-2

  Memory module descriptions and part numbers

Description

Spare part number

16 GB, DDR4-3200

L67710-001

8 GB, DDR4-3200

L46598-001

4 GB, DDR4-3200

L83673-001

Before removing the memory, follow these steps:

40

Chapter 5   Removal and replacement procedures for Customer Self-Repair parts

Содержание ProBook 445 G9











































































































Отзывы: