Speaker assembly
Description
Spare part number
Speaker assembly
829014-001
Before removing the speaker assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 33
).
5.
Remove the following components:
a.
Service doors (see
Service door on page 34
).
b.
Keyboard (see
Keyboard on page 42
)
c.
Hard drive (
Hard drive on page 35
)
d.
Top cover (see
Top cover on page 47
)
e.
System board (see
System board on page 60
)
Remove the speaker assembly:
1.
Position the computer upright.
2.
Remove the 2 Phillips PM2.0×5.0 screws (1) that secure the speakers to the computer.
3.
Remove the speaker wire from the routing clips in the chassis (2).
64
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Содержание ProBook 440 G3
