Modem module
Description
Spare part number
Modem module
NOTE:
The modem module spare part kit does not include a modem module cable. The modem
module cable is included in the Cable Kit. See
for more Cable Kit spare part
information.
High-speed 56K modem for use in all countries and regions except Australia and New Zealand
510100-001
High-speed 56K modem for use in Australia and New Zealand
510100-011
Before removing the modem module, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
5.
Remove the following components:
a.
Switch cover (see
b.
Keyboard (see
)
c.
DVD-ROM drive (see
)
d.
Speakers (see
)
e.
Palm rest (see
)
f.
Top cover (see
Remove the modem module:
1.
Position the computer right-side up with the front toward you.
2.
Remove the two PM2.5×5.0 screws
(1)
that secure the modem module to the system board.
3.
Lift the modem module
(2)
straight up to disconnect it from the system board.
4.
Disconnect the modem cable
(3)
from the modem module.
Component replacement procedures
69
Содержание ProBook 4320t
Страница 4: ...iv Safety warning notice ...
Страница 8: ...viii ...
Страница 57: ...5 Remove the palm rest 3 Reverse this procedure to install the palm rest Component replacement procedures 49 ...
Страница 61: ...Reverse this procedure to install the RTC battery Component replacement procedures 53 ...