HP Pro Scanner Output Tray Скачать руководство пользователя страница 16

Parts for which customer self-repair is mandatory. If you request HP to replace these parts, you will 

be charged for the travel and labor costs of this service.

Parts for which customer self-repair is optional. These parts are also designed for Customer Self-

Repair. If, however, you require that HP replace them for you, this may be done at no additional charge 

under the type of warranty service designated for your product.

Based on availability and where geography permits, CSR parts will be shipped for next-business-day 

delivery. Same-day or four-hour delivery may be offered at an additional charge where geography permits. 

If assistance is required, you can call the HP Technical Support Center and a technician will help you over the 

phone. HP specifies in the materials shipped with a replacement CSR part whether a defective part must be 

returned to HP. In cases where it is required to return the defective part to HP, you must ship the defective 

part back to HP within a defined period of time, normally five (5) business days. The defective part must be 

returned with the associated documentation in the provided shipping material. Failure to return the 

defective part may result in HP billing you for the replacement. With a customer self-repair, HP will pay all 

shipping and part return costs and determine the courier/carrier to be used.

7.

Should HP elect to replace or repair the defective product or part onsite, such products will be serviced at 

the end-user customer's facility at no charge only within designated local service travel areas. Outside 

designated local service travel areas, warranty services will be performed at the end-user customer's 

facility only upon prior agreement; you may be required to pay travel expenses and other applicable 

expenses for such services. Contact your local HP-authorized service provider for details on local travel 

areas.

8.

You will make all reasonable efforts to support and cooperate with HP or an HP-authorized service provider 

in resolving the problem remotely, for example, starting and executing self-tests or diagnostic programs, 

providing all necessary information, or performing basic remedial activities upon request from HP or an HP-

authorized service provider.

9.

If HP is unable to repair or replace, as applicable, a defective product that is covered by this Limited 

Warranty, HP shall, within a reasonable time after being notified of the defect, refund the residual value of 

the product. The residual value will be the purchase price paid to HP or to an HP Authorized Reseller minus 

depreciation and amortization.

10.

HP shall have no obligation to replace or refund until you return the defective components, parts, supplies, 

or hardware product to HP, including its associated documentation. All components, parts, supplies, or 

hardware products removed under this Limited Warranty become the property of HP. Notwithstanding the 

above mentioned, HP may waive the requirement for you to return the defective product.

11.

Unless otherwise stated, and to the extent permitted by local law, HP products may be manufactured using 

new materials or new and used materials equivalent to new in performance and reliability. HP may repair or 

replace products (i) with equivalent products to the products being repaired or replaced but which may have 

been subject to prior use; or (ii) with an equivalent product to an original product that has been 

discontinued.

12.

This Limited Warranty is valid in any country/region where HP or its authorized service providers offer

 

warranty services and HP has marketed the HP product covered by this Limited Warranty. However, 

warranty service availability and response time may vary from country/region to country/region. HP will not 

alter form, fit, or function of the product to make it operate in a country in which it was never intended to 

function for legal or regulatory reasons. This HP Limited Warranty is subject to all applicable laws and 

regulations including US and other national export and import laws and regulations.

13.

Contracts for additional services may be available from any authorized HP service facility where the listed 

HP product is distributed by HP or an authorized importer.

14.

You are responsible for the security of your proprietary and confidential information and for maintaining a 

procedure external to the HP product for reconstruction of lost or altered files, data, or programs. HP IS 

NOT RESPONSIBLE FOR DAMAGE TO OR LOSS OF ANY FILES STORED BY YOU ON THE HP PRODUCT’S HARD 

DISK OR OTHER STORAGE DEVICES. HP IS NOT RESPONSIBLE FOR THE RECOVERY OF LOST FILES OR DATA.

12

Chapter 6   HP Limited Warranty Statement

ENWW

Содержание Pro Scanner Output Tray


















Отзывы: