925495-001
3
Replacing the optical drive
1.
Slide the optical drive through the front bezel all the
way into the bay so that it locks into place
(1)
, and then
connect the power and data connector to the rear of the
drive
(2)
.
2.
Position the access panel with the back of the panel
extending slightly beyond the back of the computer.
Rotate the top of the panel onto the side of the
computer
(1)
, and then slide it forward into place
(2)
.
Replace the two screws in the back edge of the access
panel
(3)
.
3.
Plug the power cord and any additional cables into the
back of the computer.
4.
Press the power button to turn on the computer.
© Copyright 2017 HP Development Company, L.P.
The information contained herein is subject to change without notice. The only warranties for
HP products and services are set forth in the express warranty statements accompanying such
products and services. Nothing herein should be construed as constituting an additional warranty.
HP shall not be liable for technical or editorial errors or omissions contained herein.
First Edition: April 2017
PRINTER: Replace this box with Printed- In (PI)
Statement(s) as per spec.
NOTE: This box is simply a placeholder. PI
Statement(s) do not have to fit inside the box
but should be placed in this area.
