HP Pavilion ze5100 - Notebook PC, Руководство пользователя

Страница: 165 / 186

Reference Information
Modem Reference Information
Corporate Evaluator’s Guide 165
Modem Reference Information
If your computer has a modem port, you can customize the operation of the modem using
AT commands and S-registers. You can do this from Phone and Modem Options in
Control Panel, from most communications software, or by using terminal mode in your
software. See “To change your modem settings” on page 64.
Note
You should have a good understanding of modems and how they operate before you
change default settings.
This section contains summary information about AT commands, S-registers, and
selected result codes for the built-in modem.
Modem Reference (Conexant)
All listed AT commands must be preceded by the characters “AT” (except for the
command “A/”). The commands can be entered in upper or lower case. Many commands
can be used as queries by entering “?” as the argument.
AT Commands (Conexant)
Command Function (Conexant)
A Go off-hook and attempt to answer a call.
A/ Re-execute command (not preceded by AT).
D n Dial modifier: 0–9, A–D =DTMF digits; L=redial last number; P=pulse dialing; T=tone dialing; W=wait
for dial tone; * (“star”); # (“pound sign”); +; !=flash; @=wait for silence; $ or &=wait for credit card
dialing tone; ;=return to command state; ‘=dial pause; ^=toggle calling tone. Parentheses, hyphens,
and spaces can be used to format dial string and have no other effect.
E0 Turn off command echo.
E1 Turn on command echo (default).
H0 Initiate hang-up sequence.
H1 If on-hook, go off-hook and enter command mode.
I0 Report product code.
I1 Report LSB of stored checksum.
I2 Report “OK”.
I3 Report identification codes.
I4 Report product description.
I5 Report country code parameter.
I6 Report modem data pump model and internal code revision.
I7 Report modem data pump model and internal code revision.
I8 Report “OK”.
I9 Report country.
L
n
Set speaker volume: 0=off, 1=low (default), 2=medium, 3=high.