HP Pavilion XZ200 Series Скачать руководство пользователя страница 102

Страница: 102 / 105

Technology Code IC)

Reference Information

5-3

Table 5-1. TFT LCD Guidelines (14.1/15.0-in XGA)

Type of Imperfection

Imperfections Not Allowed

Electrical Imperfections:

Bright dots

(a)

Dark dots

(a)

•

7 or more single bright dots.

•

7 or more single dark dots.

•

9 or more total (bright and dark combined) defective dots.

•

Any occurrence of multiple defective dots within 15 mm.

Mechanical Imperfections:
Discoloration

Polarizer bubbles, dents

(b)

•

Any polarizer bubble, discoloration, or dent that is visible from at least
36 cm (14 in).

Definitions of imperfections:

A bright or dark dot is a subpixel (red, green, or blue dot) that is stuck on or off.

A polarizer dent or bubble is a light spot with a darker border that appears on a lighted display and does

not change size. In contrast, a polarizer scratch is a light line that is visible on a darker background and
does not change size.

Содержание Pavilion XZ200 Series










































































































Результаты поиска

Содержание Pavilion XZ200 Series

Отзывы:

HP Pavilion XZ200 Series, Руководство по обслуживанию, Страница: 102 / 105

Результаты поиска

Содержание Pavilion XZ200 Series

Отзывы: