HP pavilion x360 Скачать руководство пользователя страница 47 | Manualshive

Страница: 47 / 89

HP pavilion x360 Скачать руководство пользователя страница 47

Fan

Description

Spare part number

Fan (includes cable)

768021-001

NOTE:

To properly ventilate the computer, allow at least 7.6 cm (3 in) of clearance on the left side of

the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature
sensor and is designed to turn on automatically when high temperature conditions exist. These conditions
are affected by high external temperatures, system power consumption, power management/battery
conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced
through the ventilation grill located on the left side of the computer.

Before removing the fan, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.

4.

Remove the keyboard/top cover (see

Keyboard/top cover on page 27

).

5.

Remove the battery (see

Battery on page 31

).

Remove the fan:

1.

Disconnect the fan cable (1) from the system board.

2.

Remove the two Phillips PM2.4×5.7 screws (2) that secure the fan to the bottom cover.

3.

Remove the fan (3).

Reverse this procedure to install the fan.

Fan

37

«
...
45
46
47
48
49
...
»

Содержание pavilion x360


























































































Отзывы:

Нет отзывов