HP Pavilion x360 m1-u000, Руководство по техническому обслуживанию и ремонту

Страница: 61 / 90

Fan/heat sink assembly
NOTE: The fan/heat sink assembly spare part kit includes replacement thermal material.
Description Spare part number
For use only on computer models equipped with an Intel Core processor 855996-001
For use only on computer models equipped with an Intel Pentium N4200 or Intel Celeron N3350
processor 903214-001
For use only on computer models equipped with an Intel Pentium M3710 or Intel Celeron N3060
processor 855997-001
For use only on computer models equipped with an Intel Celeron N3060 processor and eMMC 855998-001
Before removing the fan/heat sink assembly, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the keyboard/top cover (see Keyboard/top cover on page 32 ).
5. Disconnect the battery cable from the system board (see Battery on page 39 ).
6. Remove the system board (see System board on page 46 ).
Remove the fan/heat sink assembly:
1. Turn the system board upside down with the front toward you.
2. Disconnect the fan cable (1) from the system board.
3. Loosen the four Phillips PM2.0×6.2 captive screws (2) that secure the fan/heat sink assembly to
the system board.
Component replacement procedures 53