background image

You can use Windows tools to create system restore points and create backups of personal information, 
see 

Using Windows tools on page 80

.

If your computer does list the Recovery partition and the Windows partition, you can use HP Recovery 
Manager to create recovery media after you successfully set up the computer. HP Recovery media can be 
used to perform system recovery if the hard drive becomes corrupted. System recovery reinstalls the 
original operating system and software programs that were installed at the factory and then configures

 

the settings for the programs. HP Recovery media can also be used to customize the system or restore 
the factory image if you replace the hard drive.

Only one set of recovery media can be created. Handle these recovery tools carefully, and keep 
them in a safe place.

HP Recovery Manager examines the computer and determines the required storage capacity for 
the media that will be required.

To create recovery discs, your computer must have an optical drive with DVD writer capability, and 
you must use only high-quality blank DVD-R, DVD+R, DVD-R DL, or DVD+R DL discs. Do not use 
rewritable discs such as CD±RW, DVD±RW, double-layer DVD±RW, or BD-RE (rewritable Blu-ray) 
discs; they are not compatible with HP Recovery Manager software. Or, instead, you can use a high-
quality blank USB flash drive. 

If your computer does not include an integrated optical drive with DVD writer capability, but you 
would like to create DVD recovery media, you can use an external optical drive (purchased 
separately) to create recovery discs. If you use an external optical drive, it must be connected 
directly to a USB port on the computer; the drive cannot be connected to a USB port on an external 
device, such as a USB hub. If you cannot create DVD media yourself, you can obtain recovery discs 
for your computer from HP. See the Worldwide Telephone Numbers booklet included with the 
computer. You can also find contact information on the HP website. Go t

http://www.hp.com/

support

, select your country or region, and follow the on-screen instructions.

Be sure that the computer is connected to AC power before you begin creating the recovery media.

The creation process can take an hour or more. Do not interrupt the creation process.

If necessary, you can exit the program before you have finished creating all of the recovery DVDs. 
HP Recovery Manager will finish burning the current DVD. The next time you start HP Recovery 
Manager, you will be prompted to continue.

To create HP Recovery media:

IMPORTANT:

For a tablet with a detachable keyboard, connect the tablet to the keyboard base before 

beginning these steps.

1.

Type 

recovery

 in the taskbar search box, and then select HP Recovery Manager.

2.

Select Create recovery media, and then follow the on-screen instructions.

If you ever need to recover the system, see 

Recovering using HP Recovery Manager on page 81

.

Using Windows tools

You can create recovery media, system restore points, and backups of personal information using Windows 
tools. 

NOTE:

If storage is 32 GB or less, Microsoft System Restore is disabled by default.

For more information and steps, see the Get started app.

Select the Start button, and then select the Get started app.

80

Chapter 8   Backing up, restoring, and recovering

Содержание PAVILION Gaming 17-ak000













































































































Отзывы: