HP PAVILION Gaming 17-ak000, Руководство по техническому обслуживанию и ремонту

Страница: 59 / 108

TouchPad click board
Description Spare part number
TouchPad click board 926530-001
TouchPad click board cable 928882-001
TouchPad cable 926518-001
Before removing the TouchPad click board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 30 ).
5. Remove the optical drive (see Optical drive on page 31 ).
6. Remove the bottom cover (see Bottom cover on page 39 ).
To remove the TouchPad click board:
1. Disconnect the TouchPad cable from the TouchPad board (1) and the system board cable from the
TouchPad click board (2).
2. Remove the three Phillips PM2.0×4.0 screws (3) that secure the TouchPad click board to the computer.
3. Remove the board from the computer (4).
Reverse this procedure to install the TouchPad click board.
Component replacement procedures 51