manualshive.com logo in svg

HP PAVILION Gaming 17-ak000, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP PAVILION Gaming 17-ak000 Скачать руководство пользователя страница 38

Battery

Description

Spare part number

4-cell, 41-Whr, 2.8-Ah Li-ion battery

919701-850

3-cell, 31-Whr, 2.8-Ah Li-ion battery

919700-850

Before disassembling the computer, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then 
unplugging the AC adapter from the computer.

To remove the battery:

1.

Position the computer upside down on a flat surface.

2.

Slide the battery lock latch (1) to unlock the battery, and then slide the battery release latch (2) to 
release the battery.

NOTE:

The battery release latch automatically returns to its original position.

3.

Remove the battery (3) from the computer.

30

Chapter 5   Removal and replacement procedures for Customer Self-Repair parts

Содержание PAVILION Gaming 17-ak000













































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды