C–4
Maintenance and Service Guide
Backup and Recovery in Windows Vista
Restoring to a Previous Date and Time
To revert to a restore point (created at a previous date and time),
when the computer was functioning optimally, follow these steps:
1. Select
Start > Control Panel > System and Maintenance >
System
.
2. In the left pane, click
System protection
.
3. Click the
System Protection
tab.
4. Click the
System Restore
button, and then click
Next
.
The System Restore window opens.
5. Follow the on-screen instructions.
Creating Recovery Discs
Recovery Manager creates a set of recovery CDs or DVDs for the
computer. Use recovery discs to restore the operating system and
software programs to factory settings, in case of system failure or
instability.
✎
Handle these discs carefully and keep them in a safe place. The
software allows the creation of only one set of recovery discs.
Note the following guidelines before creating recovery discs:
■
You will need high quality CD-R, DVD-R, or DVD+R discs
(purchased separately).
✎
Formatted DVD ± RW discs and DVD ± RW double-layer
discs are not compatible with the Recovery Manager software.
■
The computer must be connected to AC power during this
process.
■
Only one set of recovery discs can be created per computer.
■
Number each disc before inserting it into the computer
optical drive.
http://mycomp.su - Maintenance and Service Guide,Motherboard Schematics for Laptop/notebook
Ремонт ноутбуков.Запчасти и комплектующие для ноутбука.
Схемы,сервис мануалы,инструкции по разборке ноутбука.