manualshive.com logo in svg

HP PAVILION 15-BC018TX, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP PAVILION 15-BC018TX Скачать руководство пользователя страница 44

5

Removal and replacement procedures for 
authorized service provider parts

IMPORTANT:

Components described in this chapter should be accessed only by an authorized service 

provider. Accessing these parts can damage the computer or void the warranty.

NOTE:

Details about your computer, including model, serial number, product key, and length of warranty, 

are on the service tag at the bottom of your computer. See 

Labels on page 22

 for details. 

Component replacement procedures

NOTE:

HP continually improves and changes product parts. For complete and current information on 

supported parts for your computer, go to 

http://partsurfer.hp.com

, select your country or region, and then 

follow the on-screen instructions.

There are as many as 58 screws that must be removed, replaced, and/or loosened when servicing the parts 
described in this chapter. Make special note of each screw size and location during removal and replacement.

Preparation for disassembly

See 

Removal and replacement procedures preliminary requirements on page 31

 for initial safety procedures.

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the 
computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer

Base enclosure

Table 5-1

  Base enclosure descriptions and part numbers

Description

Spare part number

Base enclosure for use in the following models: 15-dp0000~0999

 

●

Shadow black finish

L42993-001

●

Acid green finish

L42992-001

Base enclosure for use in the following models: 15-bc300~399, 15-bc400~499, 15-bc500~599

 

●

Shadow black finish

L03593-001

Base enclosure for use in the following models:15-bc400~499, 15-bc500~599

 

●

Acid green finish

L22940-001

Before disassembling the computer, follow these steps:

▲

Prepare the computer for disassembly (

Preparation for disassembly on page 36

).

36

Chapter 5   Removal and replacement procedures for authorized service provider parts

Содержание PAVILION 15-BC018TX



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды