Heat sink
Description
Spare part number
Heat sink for use only on computer models equipped with an Intel Pentium or Intel Celeron
processor (includes replacement thermal material)
740186-001
Heat sink for use only on computer models equipped with an Intel Core processor (includes
replacement thermal material)
750355–001
Before removing the heat sink, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the display enclosure (see
Display enclosure on page 31
).
5.
Disconnect the tablet battery cable from the system board (see
Sensor board on page 32
).
Remove the heat sink:
1.
Detach the wireless antenna transceivers
(1)
from the heat sink. (The wireless antenna
transceivers are attached to the heat sink with double-sided tape.)
2.
Remove the seven Phillips PM1.85×3.35 screws
(2)
and the two Phillips PM1.85×1.60
screws
(3)
that secure the heat sink to the display panel assembly.
46
Chapter 5 Removal and replacement procedures
Содержание Pavilion 11 x2 PC
Страница 4: ...iv Safety warning notice ...
Страница 8: ...viii ...
Страница 59: ...2 Remove the bezel 3 Reverse this procedure to install the bezel Tablet component replacement procedures 51 ...
Страница 100: ......