HP Open View, Руководство по установке и обслуживанию

Страница: 73 / 184

Implementing Path Failover
73 Continuous Access Storage Appliance Installation and Maintenance Guide
Configuring Secure Path Manager
To configure Secure Path Manager on the host:
1. Ensure the hp OV CASA Console window is open in administrative mode.
2. Click switchui.
The CASA UI Switch Utility dialog box opens.
3. Click Yes to continue.
The Windows NT desktop opens.
4. Click Start > Programs > Securepath >SecurePathCfg.
The Secure Path Configuration Utility window opens ( Figure 15 ).
5. Click Clients.
The Client Access Configuration window opens ( Figure 16 ).
6. If
casapeernode
is listed in the Clients box, select the name and click Delete Client.
7. Enter the appliance node name (for example,
CasaN_0
) in the Selected Client box.
8. Click Add Client.
9. Enter the other appliance node name (for example,
CasaN_1
) in the Selected Client box.
10. Click Add Client.
The names of both appliance nodes and the host display under Clients.
11. Click OK.
12. Click Password.
13. Enter the password twice. Use the password entered in step 13 of “ Installing the Secure
Path Agent ” on page 71.
14. Click OK.
15. Click Done.
16. Repeat step 1 through step 15 on the other appliance node.