2.
Pry up to remove the rubber strips from the bottom of the computer.
NOTE:
You cannot replace the removed rubber strips. You must use new rubber strips when
reassembling the computer. All spare part kits that require removal of the bottom cover include
replacement rubber strips.
3.
Remove the 11 Phillips PM2.0×5.0 screws that secure the bottom cover to the computer.
4.
Lift the bottom cover off the computer.
24
Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Содержание OMEN 15
Страница 4: ...iv Safety warning notice ...
Страница 33: ...Reverse this procedure to install the WLAN module WLAN module 27 ...