background image

 

Electrostatic discharge  15 

Electrostatic discharge 

Preventing electrostatic discharge 

To prevent damaging the system, be aware of the precautions you need to follow when setting up the 
system or handling parts. A discharge of static electricity from a finger or other conductor may damage 
system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the 
device. 
To prevent electrostatic damage: 

 

Avoid hand contact by transporting and storing products in static-safe containers. 

 

Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations. 

 

Place parts on a grounded surface before removing them from their containers. 

 

Avoid touching pins, leads, or circuitry. 

 

Always be properly grounded when touching a static-sensitive component or assembly. 

 

Grounding methods to prevent electrostatic 
discharge 

Several methods are used for grounding. Use one or more of the following methods when handling or 
installing electrostatic-sensitive parts: 

 

Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist 
straps are flexible straps with a minimum of 1 megohm 

±

10 percent resistance in the ground cords. 

To provide proper ground, wear the strap snug against the skin. 

 

Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both feet 
when standing on conductive floors or dissipating floor mats. 

 

Use conductive field service tools. 

 

Use a portable field service kit with a folding static-dissipating work mat. 

If you do not have any of the suggested equipment for proper grounding, have an authorized reseller 
install the part. 
For more information on static electricity or assistance with product installation, contact an authorized 
reseller. 

Содержание NC550SFP


















Отзывы: