HP MSR SERIES, Руководство по настройке

Страница: 794 / 889

777
a. Type 30000 for Number ID .
b. Type 300 for Number .
c. Select call500 from the Bind to Menu list.
d. Click Apply .
For other settings, see Configuring Router B .
Verifying the configuration
Dial 300 at Telephone A. Telephone B rings.
Configure a secondary call on a service node
Network requirements
As shown in Figure 805 , configure an IVR access number and service node functions on Router B to meet
the following requirements.
•
After the subscriber dials 300 (the IVR access number) from Telephone A, Router B plays the audio
file bye.wav , and then terminates the call.
• If the subscriber dials a wrong number at Telephone A, Router B plays the audio file
input_error.wav .
•
If no number is dialed at Telephone A within the timeout time, Router B plays the audio file
timeout.wav .
Figure 805 Network diagram
Configuration procedure
1. Configure Router A: See Configuring Router A .
2. Configure Router B:
# Configure a service node.
Select
Voice Management > IVR Services > Advanced Settings from the navigation tree, select the
Configure Service Node tab, and click Add to access the following page.