HP MSR SERIES, Руководство по настройке

Страница: 623 / 889

606
The configuration of IVR number binding is similar to that of local number binding. Therefore, it is
not included here.
Configuring number substitution
When you configure number substitution, you need to first add a number substitution list, and then bind
a number substitution list to global, local numbers, call routes, or lines.
1. Add a number substitution list:
a. Select Voice Management > Dial Plan > Number Substitution from the navigation tree to
access the number substitution list page, as shown in Figure 624 .
Figure 624 Number substitution list page
a. Click Add to access the number substitution configuration page.
Figure 625 Number substitution configuration page
a. Add a number substitution list as described in Table 234 .
b. Click Apply .